FAW Electric Sewer Jetter Truck, , also called Electric Sewer Flushing and Cleaning Truck, FAW High Pressure Waster Flushing Truck, FAW High Pressure Jetting Truck, Electric High Pressure Jetting and Flushing Truck, High Pressure Flusher Truck, High Pressure Water Jetting Truck.
The FAW electrick water jet truck is used to clean sand, stone, grease, sludge and other materials from catch basins, storm sewers, and sanitary sewers. The truck has a high-pressure water pump that can drive a nozzle through obstructions and scour pipes clean. It also is equipped with a centrifugal compressor vacuum system for maximum debris pick up.
Technical Specification
-
FAW brand electric High-pressure water jetting is an efficient, economical, and environmentally safe way to clean drain and sewer pipes. Using high pressure pump and flexible hoses, ordinary water is propelled under varying amounts of pressure into the sewer line. Grease, sludge, sand and debris are the main causes of commercial drain line blockages. Our high-pressure water jetting and flushing truck can help you clear this sediment.
-
FAW Electric 12000liters Sewer Jetting Truck
ITEM
UNIT
PARAMETER
Vehicle
Sewer jetter truck
Overall dimensions
mm
8950*2550*4000
Water tank volume
M3
12
GVW
kg
Appro×25000
Curb weight
Appro×16800
Payload
Appro×20000
Wheel base
mm
4350+1350
F/R track base
1940/1860
F/R suspension
1250/2700
Approach/departure angle
°
32/15
Max speed
km/h
90
Axle Load
kg
6000/16000
Drive system
6*4
Emission standard
Eu 3
Tire specification
11.00R20
Number of axles
3
POWER SYSTEM
Battery Manufacturer
CATL
Battery capacity
210KWH Range Per Charge 300KM
Standard Configuration
Washing
water tank(m3)
12
water pressure(mpa)
≥16
working length(m)
≥120
Winch
tensile force(kn)
≥10
working length(m)
≥120
Nozzle
Hole clamp Angle
15°,25°
Propulsive force
≥180 N
High-pressure pump
HPP ELS122/160
Peformance
160bar 125 l/min
Inner DN(φ)
19
flow rate(m3/h)
120
Vertical suction(m)
9-10
Max vacuum
98%
Spare parts
Tank window with Gauge.
Spary gun, 10 different spary nozzles,hosepipe(¢19 PVC laminated steel tube),7 m suction pipe ¢108 , 10 m water filler hose DN 50.
Vacuum pump, water oil separator, overflow valve.
With hydraulic pressure dump function, air cylinder open rear, high pressure clean system.
Detail pictures
Our units are fully customisable and if required can be built onto existing customer chassis with plastic, mild steel or stainless steel tanks. The unit can be built according to any budget.
We can supply truck mounted units, which are pto driven or donkey engine driven depending on your needs. Tanks can be manufactured at our plant in Springs out of material you might request. The sides can be customised as well, general sizes are 6000l, 10 000l to 15 000 litres. CS TRUCKS is able to supply any chassis the customer would prefer from ISUZU ,HINO, FOTON, HOWO, MAN or Mercedes. We can do it all.
CS units are fully customisable and donkey engine and pumpsets can be completely enclosed. Werner can offer toolboxes mounted to either or both sides of the tanks.
Hose reels can also be customised from normal standard types to flag type, which allows the user to swivel the reel through 180°. Werner can supply anything required by its customers.
Hot Tags: faw electric sewer jetter truck, China faw electric sewer jetter truck manufacturers, suppliers, factory, Electric Sewer Vacuum Truck, FAW Electric street cleaning water jetting truck, FAW Electric Sewer Jetter Truck
