Products Description
Customized 100% brand new FAW Garbage Compactor Truck is a type of dry or bio-toilet which is designed to convert the human excreta into compost. It is provided with in-built sewerage mechanisms that can be easily connected to external drainage systems to ensure its sturdiness and easy usage. It is made out of the finest grade fiber reinforced plastic that is sturdy and long-lasting material. This Refuse Compactor Truck has all the necessary electrical and sanitary fittings and can be used instantly. And mainlly have below component for easy understanding: 1、FAW Chassis 2、Hydraulic System 3、Compactor body 4、Air Circuit System 5、Side Safety Fence 6、Push Shovel 7、Tailgate 8、CAN Electric-Pneumatic System 9、Tilting Device
Technical Specification
|
Items |
FAW 12CBM Garbage Compactor Truck |
|
| SIZE |
Outer Dimension（L×W×H）(mm) |
8550x2500x3260 |
|
Wheelbase (mm) |
5000 |
|
|
Kerb Weight（kg） |
9,500 |
|
|
GEAR |
Gearbox brand |
FAW |
|
Model |
FAW |
|
|
Type |
6-shift Manual |
|
|
Cab capacity（includes driver） |
2 |
|
| ENGINE |
Brand |
XICHAI |
|
Model |
CA6D | |
|
Type |
Diesel |
|
|
Rating Power（kW/HP） |
136KW / 184HP |
|
Note: 1.We keeps the right to revise the parameters on the list above.
Garbage Body basic parameter list
|
Items |
Parameter |
||
|
Garbage Body |
Capacity (CBM) |
12 |
|
|
Material |
Standard Carbon Steel T420 |
||
|
Painting |
Internal |
With anti-rust painting |
|
|
External |
Red and Green painting as required |
||
|
Control System |
Electric Control |
Control Box in Cabin |
|
|
Control Box two sides of hopper |
|||
|
Hydraulic Control |
Behind of cabin at driver side |
||
|
PLC |
New designed CAN System |
||
|
Hydraulic Cylinder quantity |
Hopper |
2 |
|
|
Slide Plate |
2 |
||
|
Scraper |
2 |
||
|
Tilting Device |
2 |
||
|
Push Plate |
1 |
||
How to use the FAW garbage truck compactor
Main CAN control box in cabin:
Switch 1: Stop & Start (Whole truck electric box working)
Switch 2: Access to Power
Switch 3: Light (Control LED light in hopper ON / OFF)
Switch 4: Tailgate Up (Control Tailgate rising up)
Switch 5: Loading Mode (Truck for loading process)
Switch 6: Discharging Mode (Truck for discharging process)
Switch 7: Tailgate Clean (One cycle working when tailgate lifting up)
Switch 8: Tailgate Down (Control Tailgate falling down)
Switch 9: Shovel (Push Plate) Push (Push Plate move out to discharge garbage)
Switch 10: Shovel (Push Plate) Pull (Push Plate move in and ready for next process)
Electric Control box at rear:
Button 1：AUTO Mode: press once, single cycle
Button 2：AUTO Mode: press once, continue cycle
Button 3：MANUAL Mode: press to make scraper open
Button 4：MANUAL Mode: press to make slide plate upward
Button 5：Work Light: for night work
Button 6：MANUAL: press once, change to MANUAL Mode
Button 7：MANUAL Mode: press to make scraper close
Button 8：MANUAL Mode: press to make slide plate down
Button 9：
LEFT: tilt device Down
RIGHT: tilt device Up
Button 10：Emergency STOP: press once, stop any process once
Main STOP Button
PUSH IN: stop all process, Button 1~10 not working
PULL OUT: all button 1~10 working
Attention usage for FAW refuse compactor trucks:
Please refer to the chassis manual for chassis faults and troubleshooting.
Users shall not adjust the pressure of hydraulic system by themselves, otherwise the hydraulic system no longer enjoy warranty services of repair, replacement and refund, and users will have to bear all consequences in case of any faults in the whole truck.
Since the hydraulic system is a high-pressure system, when overhauling fuel pumps, multi-channel valves, solenoid valves and other hydraulic components, as well as pipeline and cylinder mentioned in Table 7-1, please contact our Company professionals, and the above troubleshooting methods are only for reference.
The safety valve has been adjusted properly before delivery, and it shall not be adjusted without permission.
FAW Refuse compactor truck hire
Faw refuse compactor truck
12cbm trash truck compactor
trash compactor truck for sale FAW
|
Failure |
Cause |
Solution |
|
Oil leakage happened on oil cylinder piston rod |
1、The damage of the sealing ring 2、There are scars on the surface of the piston rod |
1、Carefully exam the guide sleeve and replace the sealing ring 2、Replace the parts. |
|
Piston rod move slowly |
1、Some air mixed in the hydraulic cylinder or in the hydraulic oil 2、There are no hydraulic oil in the tank or oil level is too low to work normally. 3、Viscosity of hydraulic oil failing standard 4、Stoppage of the oil inlet/outlet strainer 5、Stoppage or limiting of the hydraulic oil in system 6、Leakage of the oil suction pipe 7、Abrasion of the oil pump 8、Abrasion of some parts 9、Adjustment of the parts are not proper. 10、Pressure valve is too dirty 11、Overload of the system work 12、Improper oil pipe connection 13、Oil pump not work 14、The hydraulic oil temperature is too low 15、The engine’s revolving speed is not enough |
1、Eliminate all the air 2、Inject some hydraulic oil and carefully check the system. 3、Replace hydraulic oil to recommended ones. 4、Carefully clean or replace it, and find out the polluted reason 5、Carefully check the oil pipes and clean them. 6、Repair or replace it 7、Repair or replace it 8、Carefully check the pump, valve and oil cylinder, find the abrasion part and repair or replace it. 9、Refer to the technical manual to adjust properly 10、Carefully clean it 11、Refer to the technical manual to load properly. 12、Reconnect the oil pipe properly 13、Carefully check the PTO 14、The viscosity is too high and should be adjust oil temperature to working level 15、Adjust to proper level |
|
Hydraulic cylinder pushing is powerless |
1、Damage of the piston sealing 2、System pressures is too low (the overflow valve became imbalance) 3、Damage of the oil pump, System pressures is too low 4、Shortage of the hydraulic oil 5、Stoppage of the oil filter |
1、Carefully exam and replace the sealing element 2、Carefully exam and adjust the pressure of the overflow valve 3、Carefully exam and replace the oil pump 4、Carefully exam and fulfill the hydraulic oil 5、Carefully exam and replace the filter element |
|
Leakage of the oil pump |
1、Damage of the sealing filter 2、The oil pipes are not sealed as required |
1、Carefully exam and replace the sealing ring 2.1、Carefully exam, tighten the joint 2.2、Replace the joint or add some sealant to seal the joint |
|
Blister exist in the hydraulic oil |
1、Oil level in the tank is too low 2、There is water in the hydraulic oil 3、Leakage of the pipe between the oil tank and the pump 4、Hydraulic hose is kinked or squished, and limit the flow of the oil 5、Have not choose the right hydraulic oil 6、Abrasion of the sealing parts in oil pump axle |
1、Adjust the oil to required level. Carefully exam the leakage of the system. 2、Exchange new hydraulic oil 3、Fasten the joint or exchange suction pipe 4、Replace the oil pipe 5、Exchange to the recommend oil 6、Carefully clean or replace it. |
|
Oil pump is too noise while working |
1、The hydraulic oil viscosity is too high 2、Speed of the oil pump is too high 3、Suction pipe is blocked or extrusion 4、The oil tank’s respirator is blocked 5、Primary oil filter is blocked 6、Parts sticking to each other 7、There are air in the hydraulic oil 8、Hydraulic oil level is too low 9、Parts of the oil pump is abrasion |
1、Change low viscosity oil 2、Adjust the oil pump’s speed to required level. 3、Cleaning or exchange the suction pipe 4、Open the respirator , Carefully wash to clean it. 5、Cleaning the filter screen 6、Carefully repair the sticking parts, cleaning all of them, and replace when necessary 7、Carefully check the system, replace the suction pipe and sealing parts. 8、Adjust to proper level 9、Repair the oil pump and find out the reason |
|
Leakage of oil cylinder |
1、Damage of the cylinder 2、Damage of the parts of piston valve 3、Parts of the oil cylinder is loose 4、Damage of the piston rod |
1、Replace the cylinder and find out why it damaged 2、repair or replace the piston valve, find out the reason 3、Fasten the parts until no leakage 4、Carefully exam, exchange it when necessary |
|
Hydraulic oil temperature is too high |
1、Use the control valve for a long time 2、Hydraulic oil is not proper 3、The revolving speed is high 4、The inside leakage |
1、The manual joystick should reposition when not use 2、Exchange to proper oil 3、Adjust to proper level 4、Carefully check the pump, valve and oil cylinder to find out reason, then repair it. |
Customize your own FAW garbage compactor truck
Customized FAW brand trash compressed garbage trucks is of great significance and value to the construction of African countries. The following is a detailed summary:
Improving urban environment: Many cities in Africa face waste disposal and sanitation issues. Jiefang compression garbage truck has efficient garbage collection and compression functions and can effectively collect, compress and transport garbage. It can reduce garbage accumulation and pollution, improve the quality of urban environment, and improve the living environment of residents.
Improving waste disposal efficiency: African countries face challenges in waste disposal, and traditional waste disposal methods are inefficient. FAW refuse compactor trucks can greatly improve garbage disposal efficiency, reduce transportation times and labor costs, and save time and resources. It can transport garbage to the garbage treatment plant quickly and efficiently, speeding up garbage processing and improving environmental sanitation.
Promote sustainable urban development: FAW rubbish trucks mounted compactor provide support for sustainable urban development. It can compress and transport garbage, reduce the space occupied by garbage, and improve the utilization rate of garbage resources. In addition, renewable energy generated during the waste treatment process, such as biogas, can be used to generate electricity and heat, promoting the sustainable use of energy in cities.
Create jobs: Freeing up the use of compressed garbage trucks can create jobs and promote economic development. The process of garbage collection, transportation and treatment requires human participation and provides many employment opportunities, especially for the lower-level labor force. This will lead to economic growth and reduce poverty and unemployment.
Improve the image of the city: The use of FAW rear loader garbage trucks can enhance the image of the city. It marks the city's emphasis on environmental sanitation issues and reflects the advancement and standardization of urban management. By improving the waste disposal process and urban environment, it enhances the city's aesthetics and public satisfaction, and provides favorable conditions for the city to attract investment and promote tourism development.
So the refuse compressed garbage trucks is of great significance and value to the construction of African countries. It can improve the urban environment, improve waste disposal efficiency, promote sustainable urban development, create employment opportunities, and enhance the city's image. These characteristics make it an important tool for African countries to promote clean city construction and sustainable development.
Hot Tags: rear loader compactor truck faw, China rear loader compactor truck faw manufacturers, suppliers, factory, Faw Truck, 12 CBM FAW refuse truck mounted compactor for 1100L bins, 18 CBM 10 wheel FAW garbage truck compactors export to Africa, Rear Loader Compactor Truck Faw, FAW Garbage Truck Compactors, Faw Refuse Compactor Truck
