ISUZU Rear Loader Trash Truck

1. The appearance of the compactor box is arc-shaped and linear, and the four-axis plate rolling machine forms the arc in one go, eliminating the risk of leakage. The box is simple and beautiful, has strong anti-deformation performance and good structural reliability. At the same time, it effectively increases the actual area, surpassing similar products. The material is high-strength manganese steel plate, which is not easy to deform, resistant to wear and corrosion.

2. The electrical system of the vehicle can achieve fully automatic control, ensuring that acceleration or idling can be selected during work or other conditions, reducing power loss and failure rates, reducing fuel consumption, and making it more stable and more stable.

3. The intelligent control system adopts imported CAN bus design and modular structure. Through the combination of proximity switch and oil pressure induction, an efficient, stable, and easy-to-maintain compression solution is achieved. It has three operating modes: manual, automatic, and semi-automatic. It can be operated inside the cab, at the front of the compactor box, and at the rear of the box. And remote control can be optionally installed according to customer needs.

4. It adopts the latest external cylinder structure and two-way compression technology, and uses China's first-class brand accessories to achieve a compression ratio of more than 1:2.5 and a single cycle of <20 seconds, doubling the garbage collection efficiency. Taking the customer's use environment into consideration to the greatest extent, the humanized design has many highlights, with night lights, double sewage tanks, drainage pipes, remote control, operation and maintenance manuals and videos. 

The hydraulic system of a compressed garbage truck is one of the key components for its normal operation. Understanding hydraulic principles and common fault repair methods is crucial to the repair and maintenance of compressed garbage trucks. Common faults and repair methods of hydraulic systems are as follows:

1. Hydraulic pump failure

The hydraulic pump is the core component of the hydraulic system of the rear load trash truck. If the hydraulic pump does not work properly, the entire hydraulic system will lose power and cannot work normally. Common faults include pump body wear, pump shaft wear, internal oil leakage, etc. The maintenance method is to replace the hydraulic pump or repair the pump body.

2. Hydraulic cylinder failure

The hydraulic cylinder is the hydraulic actuator of the refuse compactor truck. If the hydraulic cylinder fails, the entire hydraulic system will stop working and the operation cannot be completed normally. Common faults include worn seals, clogged valve openings, etc. The repair method is to replace the seal or clean the valve.

3. Oil leakage from oil pipe

Oil pipe leakage is a common fault, which can lead to unstable pressure, insufficient flow and other problems in the hydraulic system. Common causes of failure include aging of oil pipes, wear of oil pipe connectors, etc. The repair method is to replace the oil pipe or replace the connecting parts.

4. Hydraulic valve failure

The hydraulic valve is the control element of the hydraulic system of the back loader garbage truck. If the hydraulic valve fails, the garbage can will not operate normally. Common faults include internal blockage of the valve, spring failure, etc. The maintenance method is to replace the spring or clean the inside of the valve.