Products Description
Foton Single Axle Septic Truck is equipped with a high-performance engine, with strong power output and stable driving performance. Its suspension system adopts advanced technology to make the vehicle run more smoothly. In addition, the foton single axle septic tanker truck is equipped with an intelligent control system, which makes the operation easier and more efficient.
Foton Single Axle Septic Truck is suitable for sewage treatment and removal work in cities. It has high operating efficiency and large transportation capacity, and can complete various cleaning and transportation tasks quickly and efficiently.
Key Features
----►Foton ouman cabin, good performance.
----►Yuchai engine 240 hp, strong power.
----►HC16 dirving axle, with hub reduction.
----►Super large vacuum tanker, strong payload.
----►Jurop PN155R vacuum pump, extremely reliable.
Technical Specification
Septic serivice truck also have a certain degree of flexibility and safety. Vehicles are usually equipped with high-efficiency filtration and separation equipment, which can effectively prevent dirt and foreign objects from entering the interior of the vehicle.
It is an important engineering vehicle, which provides effective support for the sewage treatment system in urban and rural areas by collecting, transporting and treating wastewater and sewage. Maintaining the efficiency, flexibility and safety of such vehicles can effectively improve environmental quality and protect public health.
General Description |
|||
| truck model | CS TRUCKS | ||
| Cab | Ouman single row cab, with power steering. Electronic flameout, A/C | ||
| Driving Type | 4x2 Left hand driving | ||
| Max Speed (km/h) | 90 | ||
| Overall dimension(mm) | 8255×2460×2820 | ||
| GVW( kg) | 22000 | ||
| Mass in working order ( kg) | 13575 | ||
| Wheelbase(mm) | 4800 | ||
| F/R track base (mm) | 2022/1830 | ||
| F/R overhang (mm) | 1500/2380 | ||
| Approach/Departure Angel | 16/14 | ||
| Tire | 295/80R22.5 (10+1) | ||
| Clutch | Single-plate dry diaphragm spring clutch | ||
| Steering | Hydraulic steering with power assistance | ||
| Gear box | 10-speed | ||
| Bridge | Front axle | 7T | |
| Rear axle | 13T+13T | ||
| Enging | Model | YC6A240-33 | |
| Fuel Type | Diesel fuel | ||
| Type | Water-cooled six-stroke,, direct injection, turbocharged | ||
| Exhaust(ml) | 7.255L | ||
| Max output power/rotate speed (hp /rpm ) | 336/2200 | ||
| Max torque/rotate speed(N.m/rpm) | 1350/1100~1600 | ||
| Braking system | Service Brake | Compressed air brake | |
| Park Brake | Spring energy | ||
| Auxiliary brake | engine exhaust brake | ||
| Eletric system | 24v | ||
Upper body specification |
|||
| Volume of tank | 10 m3 | ||
| Color | Painted in the corporation's colours with logo on both front doors as specified by the client | ||
| Material of tanker | 5mm Carbon stell (Q235) | ||
| Special function | Suction height | ≥9(m) | |
| Suction time | 250(S) | ||
| Maximum Inclination Angle | ≥45° | ||
| maximum vacuum | ≥11 MPa | ||
| Lifting time | ≤45 S | ||
| the Cover opening Angle | ≥75° | ||
| The cover opening time | ≤25 S | ||
| Suction pipe | 3m length and 100 mm in diameter | ||
| Hose Racks | Fitted on both sides of tank, to accommodate a minimum of seven hoses each | ||
| Fittings | Four-way change valve fitted to pump Drain separator vacuum pump Fully opening rear door Sight glasses at top and bottom of tank Ladder: For access to top of tank complete with cat walk on top of tank |
||
| vacuum pump | pump type | Jurop PN155R vacuum pump | |
| Max Air Flow | 11000L/min | ||
| Time to suction full tank | 12-15 minuted | ||
| Suction Depth | 8 m | ||
| suction pressure (MPa) | 5.4 | ||
| diameter (mm) | 80 | ||
| Brief introduction of function | It is formed of PTO, transmission shaft, vacuum pump, tanker, hydraulic system and pipe system. | ||
Cesspool truck detail
Good performance cabin
Hydraulic cylinder
6x4 drive system
Italy Jurop PN155R vacuum pump
Original coupling system
PN155R vacuum pump
Purchase vacuum truck knowledge
We will select the most suitable supplier, sign the supply contract and make payment for the goods. Before signing a contract, we will scrutinize the terms of the contract with legal counsel and ensure that our rights and risks are covered by the contract.
Once the contract is signed, we will make the payment according to the contract requirements, and arrange the transportation and delivery of the Single Axle Septic Truck.
First, we will build a purchasing team, which is composed of professionals, including purchasing managers, technicians and legal advisors. They will work together to define our requirements and review available suppliers. Secondly, we will conduct market research to understand the available Single Axle Septic Truck suppliers in the African market.
We will contact local agents, manufacturers and distributors to learn about their products, prices and after-sales services, and integrate them into our supplier list. Then, we will conduct supplier evaluation and screening. We will evaluate suppliers based on their qualifications, reputation, experience and price, and shortlist qualified suppliers.
Factory production
Hot Tags: foton single axle septic truck, China foton single axle septic truck manufacturers, suppliers, factory, 12 000 liters shacman cesspool suction truck, Foton Sewage Disposal Truck, 10 CBM Jac lorry vacuum suction truck, Foton Single Axle Septic Truck, Septic Tank Delivery Truck Howo, 10 CBM Foton septic service truck
