Street Road Sweeper Howo

Howo sweeper truck is a special vehicle used for urban road cleaning and cleaning factory environment. It adopts the chassis produced by China CS TRUCKS and the cleaning equipment of the cleaning truck manufacturer, which has excellent cleaning effect and high reliability. The sweeper truck has a simple and elegant appearance design. The body is made of high-strength steel plates and has undergone precise welding and polishing treatments. It has a corrosion-resistant, structurally stable and elegant appearance.

Howo cleaning and sweeping truck uses an efficient cleaning device and vacuum system to quickly clean up garbage and dirt on the road. It can clean dust, mud and grease from the road surface, effectively preventing the impact of dust and debris on the environment and driving safety. At the same time, the sweeper can also vacuum and remove fallen leaves, debris and small garbage on the road to keep the road clean and tidy.

----► Euro design howo cabin truck, 4x2 drive

----►  Powerful vice engine, suitable for tough work
----►  GTM high-pressure water pump, very reliable.
----►  high-pressure curb cleaning nozzle, low-pressure pump

----►  Large dustbin box, payload more waste

Howo brand cleaning and sweeping truck has excellent cleaning effect and energy-saving features. It can effectively remove stains and dirt from the road surface, making the road smoother and brighter. Compared with traditional cleaning methods, the sweeper truck uses high-pressure water guns and vacuum cleaners, which not only have better cleaning effects, but also reduce the waste of water and energy, and have lower energy consumption.

Howo high pressure sweeper Truck Quotation Sheet

Chassis Information
Chassis brand		Howo
Chassis model		ZZ1187K
Drive type		4×2
Dimension Parameter
Overall dimension (L*W*H) (mm)		8580*2500*3100
Wheel base (mm)		4770
Wheel No.		2
Weight Parameter
GVW (kg)		19000
Kerb weight (kg)		11350
Front / Rear axle (T)		6.5T / 12T
Engine Parameter
Model		WP6.220E32
Manufacturer		Weichai
Horsepower (hp)		220
Displacement / power (ml/kw)		6230/155
Engine type		6 cylinder in-line, water cooling
Emission Standard		EURO 3
Transmission
Control type		manual
Gear Shift		8 forward and 1 reverse speeds
Tyre
Type		11R22.5
Tyre No.		6+1 spare tyre
Cab
Type		flat roof cab with A/C, power steering
Upper Structure Parameter
Volume of water tank		7000L
Volume of Dustbin		7000L
Material of the water tank and garbage tank		Stainless steel
Hydraulic valve		Taiwan famous brand
Hydraulic motor		Domestic famous brand
Switch		Schneider control switch
Auxiliary Motor	Brand	Dongfeng Cummins
	Horsepower	170HP
High pressure washing Technical	washing width (mm)	3.5m
	Washing speed	3-20km/h
	Washing water pressure	10Mpa
	Water pump flow rate	154L/min
Sweeping Technical	Max sweeping width (mm)	3.5m
	Max. sweeping capacity	70000m3/h
	Sweeping speed	3-20km/h
	Cleaning efficiency	≥95%
	Max. particle inhalation	110mm
	Disc plate brush extension size	≥400mm
	Garbage tank door max. discharge angle	≥50°
Sweeping system	Type	Total 2 pcs brushes and 1 sucking disc mounted in the medium, it is driven by the hydraulic motor, speed is adjustable, can be independently controlled, has automatic avoidance function
	Sweeping brush diameter	Φ850mm
	Sweeping disk speed	110r/min high-speed, 80r/min medium speed, 50r/min low-speed
	Sweeping disk dip angle adjust	forward 4 ° ~ 6 ° extroversion 4 ° ~ 7 °
Sucking disc	Type	Double suction hole, hydraulic control, spring suspension
	Suction hole diameter	180mm
	Suction disc width	2400mm
Hydraulic system	Type	Open type, electrical control
	Main components	Gear pump, hydraulic motor, hydraulic cylinder, solenoid valve
	Pressure	16Mpa
	Hydraulic oil volume	60L
	Oil temperature	60°C
Water spraying system	Components	Pump, nozzle, water filter, etc.
High pressure water system	Type	High pressure plunger pump
	Model	Germany PINFL PF36
	System Pressure	10Mpa
	Rotation speed	1150r/min
	Water valve type	hydraulic high pressure ball valve
	Water valve pressure	7MPa
	Nozzle type	High pressure washing type
	Water filter	Strainer mesh
	Winch	20m
Low pressure water system	Model	Hangzhou Weilong 60/90
	Flow rate	60m3/h
	Water delivery distance	90m
	Washing width	24m
Side spray rod	type	V-type spray bar, with automatic avoidance function
Electrical system	Type	DC24V, PLC control
	Volts	24V
	Battery	2x12V
Tools
Fire hose		2 pcs
Fire wrench		1 pcs
Water filter wrench		1 pcs
High pressure spray gun		1 pcs
Manual hydraulic pump rocker		1 pcs
Spare parts
Sweep brush		88 pcs
Fan seal		1 pcs
Rear door seal		1 pcs
Suction tube seal		2 pcs
Import Parts List
High pressure water pump		Germany PINFL PT40
Automatic unloading valve		Germany PINFL VB200/150
Relief valve		Germany PINFL VS200-180
Electric control box controller		Germany STW
Rotary switch		Japan
Sewage tank sensor		USA
Hydraulic valves		Taiwan SWH-G02-C4-D2H
Unit Price (USD/unit)
FOB Shanghai or Qingdao Port, China
Main function
The road washing sweeper has three truck function together, road sweeper, water sprinkler, high pressure jetting truck. Road washing sweeper with road sweeping, road washing, high pressure jetting, low pressure washing, road edge washing, garbage collection, sewage recovery, dust suppression, road wall cleaning, small advertising cleaning and other operating functions.

 

Truck detail

Howo medium truck chassis

 

Reliable sweeping system

Europen design cabin

Side sweeping system

10,000 liter water tank

7000 liters dusbin tank

 

Sweeper vehicle maintenance refers to the maintenance of cleaning tool vehicles to ensure their normal operation and extend their service life. When performing maintenance on the cleaning and sweeping vehicle, you need to pay attention to the following matters to ensure the quality and safety of the maintenance.

1, sufficient inspection and diagnosis must be carried out before repair to accurately determine the problems and faults that require repair. You should carefully observe the appearance and functions of the vehicle, and check whether the brush tray, water pump, breast pump and other components are intact, and whether there are any abnormalities such as abnormal noise or leakage. The rigor and comprehensiveness of this link are crucial for subsequent maintenance operations.

2, operating specifications must be followed during the maintenance process. During maintenance, the power supply should be disconnected first to avoid the risk of electric shock. Wear protective gloves and goggles during operation to prevent injuries due to careless operation. Before operation, the vehicle must be parked on a flat surface to ensure stability and safety during the repair process. Again, the tools and parts used in the repair process must meet quality standards.

Choose the right tools and parts and avoid using expired or defective equipment. Before formulating a maintenance plan, it is necessary to carefully study and understand the technical requirements of the cleaning tool vehicle to ensure the effectiveness and operability of the maintenance plan.

3, during the maintenance process, attention needs to be paid to protecting the environment. Waste materials and pollutants generated during the maintenance process should be cleaned up in time, classified and processed according to regulations to avoid secondary pollution to the environment and ecology. At the same time, ensure that the chemicals used such as lubricants and detergents meet environmental requirements to reduce damage to the natural environment.

4, after the repair is completed, the repair results must be inspected and tested. Make sure the repair process is done correctly and the vehicle is running properly. During the inspection process, it is necessary to check whether all functions and accessories of the vehicle are complete, and conduct a trial run to ensure the effectiveness and safety of the repair.

 Compared with ordinary road sweepers, sweeper trucks have the following 4 advantages.

1, the cleaning and sweeping truck has an efficient cleaning function. The sweeper truck adopts waterway cleaning technology, which can spray water and cleaning agent directly onto the ground for cleaning, and can quickly remove dust, sediment and other pollutants on the road. At the same time, the cleaning and sweeping truck is equipped with a high-pressure floor washing system, which can effectively wash the ground to maintain the cleanliness of the road. In contrast, ordinary road sweepers can only perform sweeping work, but cannot clean and flush the ground, and the cleaning effect is relatively poor.

2, the cleaning and sweeping truck is environmentally friendly and energy-saving. The sweeper truck uses efficient green cleaning agents to reduce environmental pollution. Moreover, the cleaning and sweeping vehicle can recycle cleaning agent and water to avoid waste. In addition, the cleaning and sweeping truck can also use solar energy to charge, reducing energy consumption and achieving energy conservation and environmental protection. Ordinary road sweepers usually use fuel or electric energy, causing greater pollution to the environment.

3, the sweeper truck is versatile. The sweeper truck can not only carry out road cleaning work, but can also be used to clean small squares, parking lots, sidewalks and other places. In addition, the sweeper truck can also be equipped with vacuuming and weeding functions, which can comprehensively clean and maintain the road. Ordinary road sweepers can only perform cleaning work and have relatively single functions.

4, the cleaning and sweeping truck has the advantage of being efficient and saving manpower. The cleaning and sweeping truck adopts a fully automatic cleaning mode, which does not require manual operation and can greatly reduce labor costs. However, ordinary road sweepers require manual pushing and operation, which results in low work efficiency and high cost.

To sum up, compared with ordinary road sweepers, sweeper trucks have the advantages of efficient cleaning, environmental protection and energy saving, multi-function and high efficiency and saving manpower. Therefore, in road cleaning work, sweeper trucks can more effectively improve cleaning quality and efficiency.

Hot Tags: street road sweeper howo, China street road sweeper howo manufacturers, suppliers, factory, 14000L howo high pressure road sweeping truck, Road Sweeping Truck Howo, 16000L howo street road cleaning truck, Street Road Sweeper Howo, Sweeper Cleaning Truck