Home>Products> Faw Truck > Faw Septic Pump Truck

FAW Septic Tank Cleaning Truck

12,000 liters FAW septic suction truck
With the acceleration of urbanization, more and more wastewater and waste are discharged from cities, and sewage suction trucks have increasingly become one of the important equipment in urban sanitation, municipal maintenance and other industries. A vacuum suction truck is a kind of equipment specially used to clean all kinds of sewage. With the continuous improvement of environmental awareness, the demand for sewage trucks is also increasing.

Model: CSC5180GXW
Capacity: 12000 liters
Drive: 4×2
Engine power: 220 HP
Engine type: CA6DH1-22E5

Send Inquiry

Description

Products Description

The FAW septic tank cleaning truck is based on the FAW chassis with a total mass of 18 tons, and is composed of a tank assembly, a power take-off system, a gas circuit assembly, a pipeline assembly, a hydraulic lifting system, etc. The tank adopts a closed vacuum system, and the sewage slurry is automatically sucked into the tank through pipelines under negative pressure, and is finally discharged through the drain valve. The tank body is fixed to the chassis frame with U-shape bolts, and a rubber band is placed in the middle to reduce the impact of the chassis on the tank body. The front part of the tank is the power take-off system, and the rear part is the piping system for sewage pump in and out.

Vacuum pump trucks are widely used and are mainly used for cleaning various sewage channels, including cleaning municipal cityscapes, roads, bus stops, municipal buildings, sewage pipes, septic tanks, sedimentation tanks, urban rainwater drainage systems, rivers, etc. Desilting and dredging of the site. It can also be used in industrial enterprises, mines, oil fields and other sites that need to clean and absorb chemical liquids, dirt and waste liquids.

FAW vacuum truck

Products specifications

General	Vehicle Name	FAW 12000 liters vacuum sewage truck
	Chassis Brand	FAW
	Overall Dimension(mm)	7900x2500x2650
	GVW(kg)	18000
	Curb weight(KG)	8200
Cab	Seat	2 seats with sleeper
Cab	Air Conditioner	Standard
Engine	Fuel Type	diesel
	Engie Model	CA6DH1-22E5
	Engine Brand	FAW
	Power(KW)	220HP
	Max. torque	850N.m
	Displacement	5.7L
	Emission Standard	Euro 5
Chassis	Drive Type	4X2
	Transmission	FAST 8-speed gearbox, Manual
	Wheelbase(mm)	4500
	Front/rear axles	6500/11500kg
	Front/rear wheel track	1914/1878 mm
	Approach / departure angle	28°/24°
	Tyre Specification	10.00R20
	Tyre No.(pcs)	6+1
	Max Speed(km/h)	90
	Paint	Two coats of primer and one coat of topcoat
	ABS	Standard
Superstructure	Tank capacity	12,000 Liters
	Tank material	Carbon steel
	Material thickness	6mm
	Vacuum pump	High efficient, vacuum rate over 93%, quick suction and discharge, suction depth 7m
	Rear door	hydraulic open / close for complete discharge of liquid waste
	Standard configuration	Warning lights, liquid level alarm, basic tool kit, English manual
	Optional	Tank material could be stainless steel. Water jetting device could be customized.