The most significant feature of the loader waste compactor truck is that it can compress and compact the garbage. It is equivalent to a small compression garbage station and has a large enough "appetite" to bear enough pressure. People often call it the "Big Eater". Its "appetite" is 3 to 4 times that of ordinary garbage collection trucks, so it is deeply loved by new and old customers.
The use of loader waste compactor truck has spread all over the world. loader waste compactor trucks are already widely used in cities in every country. In order to help owners better maintain the excellent condition of loader waste compactor truck , Chusheng garbage truck manufacturer is here to introduce to you. Let's take a look at how to use a the truck. Correct use can improve efficiency and is crucial to the maintenance of the car body.
So, how should loader waste compactor truck be used correctly?
1. Turn on the power switch, turn on the power take-off, and ensure that the tipping bucket moves downward until it is parallel to the ground. Through the control panel in the cab, click on the loading mode to get off the vehicle and load garbage.
2. Operate the rear electronic control panel, retract the push plate cylinder, push the skateboard cylinder to the maximum stroke, push the scraper to the maximum stroke, control the scraper cylinder to retract so that the scraper everts to the maximum position, and control the skateboard cylinder to retract. Lower the skateboard to the lowest position to create enough space.
3. Align the wheel axle of the hand-pushed garbage bin with the wheel fork in the bucket, and attach the front end of the garbage bin to the triangle to prevent the front part of the garbage bin from falling to the ground. Our compressed garbage trucks match 220L, 660L, and 1100L international standard garbage bins.
4. Open the front baffle of the garbage trolley, operate the control handle of the turning bucket or the electric control button, so that the turning bucket and the hand-pushed garbage bin go up together at a constant speed, unload the garbage into the bale bin, and then operate the control handle of the turning bucket to move upward. The lower pusher should not be loose, so that the tipping bucket and the push garbage truck can go down together at a constant speed, and the hand push garbage can be emptied out.
5. Control the scraper cylinder to extend to the maximum position so that the scraper scrapes clockwise to the maximum angle. Note: If the garbage in the bucket body is uneven and it is difficult for the scraper to scrape the garbage clockwise, you can scrape at a small angle multiple times to make the garbage even and then scrape the entire angle. Control the skateboard cylinder to extend to make the skateboard move to the highest position.
6. Repeat the above steps until all garbage is loaded and unloaded. Operate the dump truck to the closed position, and from inside the cab, depress the clutch. Press the power take-off switch to disconnect it. Drive to the next garbage collection point.
At the same time, the detailed performance of the loader waste compactor trucks during use can also reflect the quality of the truck:
1. A good garbage compactor truck must be economical: when the special equipment is working, the computer control system automatically controls the throttle to ensure that the engine of the garbage compression truck can automatically select acceleration and idle states under various operating conditions, avoiding power loss. and system heating to achieve the best fuel-saving effect and improve economic benefits.
2. Garbage compactor trucks generally need to operate in a high-intensity environment during use. Its mechanical parts and hydraulic parts need to do a lot of repeated high-intensity work every day. The precision of the working strokes is generally not the same during re-testing. It can be clearly seen that garbage compression trucks with smooth scraper slides and low noise have a lower failure rate.
3. Pay attention to the inspection of other details of the garbage compactor truck. Better-quality garbage compression trucks also have the following features: low calorific value of hydraulic oil pipes, beautiful and reasonable wiring, easy connection and disassembly of various parts for easy maintenance, and more steel injection for mechanical turning parts Advantages such as parts.
Choosing a high-quality manufacturer is the basic guarantee for a good experience in using garbage trucks. Chusheng has been producing compressed garbage trucks for decades and has served more than 100 customers around the world. It is trustworthy.
