Concrete Mixer Truck Beiben
video
Concrete Mixer Truck Beiben

Concrete Mixer Truck Beiben

10 Cbm beiben 2634 cement mixer truck
Beiben 2634 Concrete Mixer Truck is a vital piece of equipment used in construction projects around the world. Its primary function is to transport concrete from the batching plant to the construction site, ensuring a consistent and even distribution of the material. The design of Beiben 2634 Concrete Mixer Truck allows for efficient mixing and transportation of concrete. The truck features a rotating drum, where the concrete materials are loaded and mixed. The drum is usually made from heavy-duty steel, capable of withstanding the weight and pressure of the concrete. Inside the drum, there are blades or fins that help to mix the concrete thoroughly.

Model: CS5250JB
Capacity: 10 Cbm
Drive: 6×4
Engine power: 340 HP
Engine type: WP10.340E
Send Inquiry
Description
Products Description

concrete mixer truck, also known as a cement mixer truck, is a specialized vehicle designed to transport and mix concrete. These trucks are widely used in construction projects, such as building roads, bridges, and buildings, where ready-mix concrete is required. They help to save time and labor by eliminating the need for manual concrete mixing on-site.

The main component of beiben concrete mixer truck is the mixing drum, which rotates on its axis to mix the concrete ingredients. The drum is made of high-strength steel to withstand the heavy loads and extreme conditions of the construction site. It is mounted on the back of the truck chassis, and can be tilted to pour the mixed concrete into a desired location.

 

cement mixer truck beiben

Beiben transit mixer trucks are highly maneuverable and can easily navigate through tight construction sites. They have a small turning radius, which allows them to access areas that would be difficult or impossible for other types of construction vehicles. This makes beiben transit mixer trucks ideal for urban construction projects, where space is often limited.

 


Key Features

----► NG80B cabin, mercedes benz technology.

----► High strength drum, 40% stronger than others.
----►USA eaton oil motor and pump.
----►Special after sale service, 24 hours on line training.
----►Easy operation and convenient maintenance

 

2634 beiben Concrete mixer truck specification

 

Dimension (mm) 9200×2500×3900
Wheel base (mm) 3800+1450
Curb weight (kg) 13785
Engine Model WP10.340E32,water-cooled,four strokes,6 cylinders straight in line,turbocharged,
Fuel type Diesel
Min rate of consuming fuel(g/(kw.h)) 196g/Kw.h
Rated Power
/ rotating
(kw/(r/min)
250Kw/1900rpm
Emission EURO III
Maximum Torque / rotating speed(n.m/(r/min) 1250Nm/1400-1600rpm
Displacement(ml) 9726
Fuel tanker capacity (L) 400
Clutch Model GFX430, Single dry frictional disc,Hydraulic boosting
Gearbox Model 9JS150A, mechanical type,9 Forward speed gear.
Brake system Service brake Brake gap can be adjusted automatically, double circulation air brake system
Assistant brake Engine exhaust brake
Park brake Potential springs pressing on middle and rear wheels
Steering system (Z F company, Germany) Model Z F8098, whole circulation in ball type, hydraulic boosting
Frame Fish belly shape, variable width, variable sections
Front axle (Mercedes Benz Technology)
Double-shoe pneumatic brake, non-driving steering axle
Middle and Rear axle (Mercedes Benz Technology)
Double-shoe pneumatic brake, ductile casting casing, with hub redactor, double reduction driving axle
Tire 315/80R22.5
Qty of tire 11
Electrical system Battery 2X12V/135Ah
Generator 28V-35A
Starter 5.4Kw/24V
Cab
Short cab,
Full steel skeleton structure, covered with double layer steel plate;
Can be tipped forwardly;
With Tropical thermostat

Exterior trimming:
Single layer road bumper, three steps, with new mirror. with outer sun visor
Upper body dimension
(CBM)
9


Upper part

Geometric volume of drum(m³) 14.4 Capacity for water tank(L) 350
Material of drum/blades Q345B Slump range(mm) 50-210
Inclination angle for drum(°) 13.5 Water supple pressure(MPa) 0.3
Padding rate(%) 69.40% Max. External diameter of drum(mm) 2342
Residual rate(%) <0.2 Length of the drum(mm) 4744
Feeding speed(m³/min) ≥3 Upper-fixing Length(mm) 6190
Discharging speed(m³/min) >1 Subframe Length(mm) 5100
Mixing speed(r/min) 0-14 Chute Position(mm) 1090
Hydraulic pump Rexroth A4VTG90 Center of Gravity when Fully Load(mm) 2768
Hydraulic motor Rexroth AA2FM90 Hopper Height(mm) 2538
Reducer ZF P5300 Upper-fixing Height(mm) 2696
Radiator KT-18 Overall dimension(L*W*H/mm) 6190*2600*2696
 

 

Beiben concrete mixer truck customer case
transit mixer truck beiben03
transit mixer truck beiben04
transit mixer truck beiben01

 

transit mixer truck beiben02

 

 concrete mixer truck is a special vehicle used for mixing, transporting and unloading concrete. It consists of several key components. The five main key components of a concrete mixer truck will be described below.
 
1. Mixing drum: The mixing drum is one of the most important parts of the concrete mixer truck. It is made of special materials with high strength and wear resistance. The mixing drum is equipped with blades that can fully mix cement, aggregate and water to ensure the uniformity of concrete.
 
2. Transmission system: The transmission system is one of the core components of the concrete mixer truck. It includes engine, transmission and drive shaft etc. The engine provides power to drive the mixing drum to rotate, the transmission enables the vehicle to run at different speeds, and the drive shaft transmits power to the mixing drum.
 
3. Water supply system: An appropriate amount of water needs to be added during the concrete mixing process. The water supply system includes water tanks, water pumps and water pipes. The water tank is used to store water, and the water pump draws the water out of the water tank and transports it to the mixing drum through the water pipe to ensure the humidity of the concrete.
 
4. Braking system: Due to the large size and heavy load of concrete mixer trucks, the braking system is very important. Braking systems include air pressure brakes and hand brakes. The air brake is used to brake the vehicle while driving, and the handbrake is used to fix the vehicle's position when parking.
 
5. Control system: The control system is a key component in the operation of the concrete mixer truck. It includes joysticks, instrument panels, electronic controllers, etc. The joystick is used to control the rotation and discharge of the mixing drum. The instrument panel displays the operating status and parameters of the vehicle. The electronic controller monitors and controls the rotation speed of the mixing drum and the work of the water pump.

Hot Tags: concrete mixer truck beiben, China concrete mixer truck beiben manufacturers, suppliers, factory, Concrete Mixer Truck Beiben, 10 Cbm beiben 2634 cement mixer truck, 16 Cbm beiben 8x4 drive concrete mixer truck, Concrete Mixer Truck, Transit Mixer Truck Beiben, Concrete Mixer Truck Foton Aumark

Send Inquiry
Categories
Contact Us

(0/10)

clearall