Home > Knowledge > Content

How to Solve Weak Suction of Vacuum Sewage Suction Truck?

Aug 19, 2026

The vacuum suction trucks rely on negative pressure to pump out sewage and sludge, and are used in municipal projects, construction sites, and factories. Long term operation can easily lead to malfunctions such as insufficient suction, slow suction, and incomplete material removal. While these issues don't cause downtime, they reduce efficiency, increase costs, and in severe cases, cause pipeline blockage and pump damage.

info-1-1

This article outlines the root causes of weak suction, provides quick solutions, and outlines preventative maintenance strategies to help maintenance personnel efficiently troubleshoot and quickly restore equipment to its rated performance.

 

 

I.How Does A Vacuum Sewage Truck Work?

To efficiently troubleshoot suction malfunctions, it's essential to first understand the equipment's operating logic. Vacuum sewage trucks rely on a vacuum pump to extract air from a sealed tank, creating a stable negative pressure environment, this atmospheric pressure then forces external sewage and sludge into the tank.

 

All suction power deficiencies can be categorized into four core types: insufficient vacuum due to system leaks, excessive blockage in the pipeline filter causing excessive flow, abnormal vacuum pump power system, and improper human operation and maintenance. All troubleshooting and repair work revolves around these four core dimensions.

info-1-1

 

II.Causes And Solutions For Weak Suction

Fault Category Common Fault Points Solutions
System seal leak The rubber seal on the rear cover of the tank is aged and dirty, resulting in poor sealing; pipe joints and O-rings are damaged; the four way valve/check valve is stuck; and the vacuum pump oil seal and inspection port are leaking Clean the sealing surfaces, replace aged rubber strips and sealing rings; clean faulty valves and replace damaged parts directly; perform tank pressure testing and leak detection after repairs
clogged pipes and filters Clogged prefilter at suction port; silt and fibrous debris accumulated in pipes; clogged water-air separator channels High pressure flushing of the filter screen; segmented cleaning of pipe deposits; regular maintenance of the water air separator; daily cleaning of the filter screen upon completion of work
Vacuum pump body malfunction Vacuum pump oil deterioration or abnormal level; internal blades and rotor wear; damaged pump oil seal leading to air ingress Add/replace vacuum pump oil; if abnormal noise or insufficient negative pressure occurs, disassemble and repair worn parts, replace oil seals, and perform a no-load pressure test
Improper operation and maintenance Four way valve incorrect gear position; power take off not fully engaged; insufficient engine speed; prolonged overload and high temperature operation Before operation, confirm the status of valves and power take off; maintain rated operating speed; avoid overload operation; and establish a regular maintenance system

info-1600-916

 

 

III.How To Troubleshoot Problems Quickly

To facilitate rapid on site repairs, a simplified troubleshooting logic has been developed for time saving and high efficiency:

 

  • Vacuum pump operates normally but suction is weak ⮕ First check for system leaks and clogged pipe filters.
  • Vacuum pump makes abnormal noises and pressurizes slowly ⮕Focus on checking oil quality, pump body blade wear, and damaged oil seals.
  • Suction is inconsistent, operating conditions are unstable ⮕ Check for stuck valves and loose pipe joints causing leaks.
  • No suction at all, unable to draw material ⮕ Check valve positions and power take off status.

3

 

 

IV.Daily Maintenance Tips To Avoid Suction Weakness

Maintenance Cycle Maintenance Project
Daily Clean the suction port filter and flush away any residual dirt inside and outside the pipes
weekly Conduct a thorough inspection of sealing strips and pipe joints to identify potential air leaks
Monthly Check the vacuum pump oil level and quality; observe the equipment's negative pressure condition
3-6 months Replace vacuum pump oil; perform pressure holding and sealing test on the tank
Long term operation and maintenance requirements Train operators to prevent misoperation and overloading

 

 

V.Conclusion

Insufficient suction power in vacuum sewage trucks is a common and easily repairable problem. Following the sequence of checking for leaks, clearing blockages, and repairing the vacuum pump will quickly restore operational capability. Adhering to standardized and regular maintenance can significantly reduce the frequency of malfunctions, extend the vehicle's lifespan, and control project operating costs.

 

 

VI.Frequently Asked Questions

Q1: If the suction power of a vacuum sewage truck weakens, what should be checked first?

A: According to maintenance priority, first check for air leaks in the seals, then clear any blockages in the filter screens and piping, and finally inspect the vacuum pump. Air leaks are the most common cause of insufficient suction.

 

Q2: How to quickly determine if a vehicle has an air leak?

A: Close the suction valve and start the vacuum pump to observe the vacuum pressure gauge. If the negative pressure fails to rise and the pressure stabilization is poor, it can be basically determined that there is an air leak in the system. Focus on checking the rear cover rubber seal, pipe joints, and various valve bodies.

 

Q3: Why is the suction still insufficient even after cleaning the filter?

A: There are most likely two problems: ① Debris buildup deep in the pipes or inside the water air separator causing blockage; ② There is an air leak in the sealing system, requiring section by section leak testing.

 

Q4: Will emulsification of the vacuum pump oil affect suction?

A: Yes. Oil water emulsification will damage the internal seals of the vacuum pump, reducing pumping efficiency and directly causing insufficient negative pressure and weak suction. The vacuum pump oil must be replaced immediately.

 

Q5: What should I do if there is still air leakage after replacing the sealing strip?

A: Clean the back cover's mating surface of dirt, sand, and protruding impurities; check if the back cover latch is properly tightened; confirm that the sealing strip is not twisted or deformed, and adjust the back cover gap if necessary.

 

Send Inquiry
Categories
Contact Us