ISUZU Giga Dropside Cargo truck mounted Palfinger SPS40000 boom Crane
Isuzu giga boom crane truck, it is a kind of Isuzu special trucks that can realize the lifting, turning and hoisting of goods through hydraulic lifting and telescopic system, and is usually assembled on trucks. It is generally composed of truck chassis, cargo box, power take-off and crane.
Isuzu Giga cargo truck mounted Palfinger crane adopts Isuzu Giga chassis and multi lever operation, which is simple, convenient and powerful. The boom can be rotated and retracted, which is efficient and stable, and is suitable for various construction sites.
PALFINGER produces according to European Quality Standards to ensure the best reliability, performance and safety in the industry
- High tensile strength extension booms to optimize lifting height and working range
- The wide outrigger span ensures the best stability in all mounting situations
- High safety factor with greater reliability
- Standard package includes
- Emergency stop button
- Working light
- High pressure filter
- Over-winding stop
- Piston pump for reliablity, efficiency, and extended lifetime
Technical Specification
|
Name |
ISUZU GIGA CARGO TRUCK WITH CRANE |
|
|
Drive type |
6×4 |
|
|
Kerb mass (kg) |
12500 |
|
|
Rated loading capacity(kg) |
--- |
|
|
Total mass(kg) |
25000 |
|
|
Max. speed (km/h) |
75 |
|
|
Min. turning circle (m) |
18 |
|
|
Approach/Departure(°) |
16/70 |
|
|
Max. gradeability (%) |
60 |
|
|
Appearance dimensions (mm) |
12000×2500×3450 |
|
|
Wheel base (mm) |
4600+1350 |
|
|
Overhang(front/rear) |
1500/725 |
|
|
Track width (mm) (front/rear) |
2022/2041 |
|
|
Engine |
ISUZU 6WG1-TCG52 |
|
|
Rated output power |
309kw |
|
|
Torque(N.m r. p. m) |
1820/1100-1500 |
|
|
Displacement(L) |
9.726 |
|
|
Fuel tank capacity (L) |
400L |
|
|
Tyre: |
12.00R20 10+1pc |
|
|
Clutch |
φ430 diaphragm spring |
|
|
Gearbox |
Transmission |
10 forward&2 reverse Manual |
|
Front axle |
ISUZU |
|
|
Drive axle |
ST16 ratio 4.8 |
|
|
Steering |
(left-hand drive) |
|
|
Brake |
Service brake |
With dual-circuit compressed air brake |
|
Park brake |
Power spring brake acting on front & rear wheel |
|
|
Auxiliary brake |
Engine exhaust valve brake |
|
|
Cab |
GIGA Cab with Single sleeper A/C |
|
|
With Wind scooper and air guide sleeve |
||
|
Battery |
165AH |
|
|
Cargo Carriage Internal Dimensions |
7200x2400x600(LxWxH)mm |
|
|
Steel thickness of Carriage: |
Floor: 3mm, Side:1.5mm |
|
|
Crane |
12tons straight arm crane |
|
|
Delivery date |
40 working days after receiving the down payment. |
|
16Ton Palfinger SPS40000 Stiff boom crane details specificaiton
|
Basic Data |
SPS 40000C |
|
Rated Lifting Moment |
40 mt |
|
Rated lifting capacity |
16000 kg (2.5 m) |
|
Max. outreach |
18.6 m |
|
Max. lines of the hook |
6 |
|
Slewing angle |
Continuous |
|
Boom raising angle |
0 ~ 75° |
|
Max. lifting height (the measurement from the ground after the outriggers fully extended) |
21.5 m |
|
Length of the boom system (retracted) |
6.23 m |
|
Length of the boom system (fully extended) |
19 m |
|
Boom sections |
5 |
|
Outrigger span(fully extended) |
7250 (mm) |
|
Recommended Flow Rate |
80 ~ 110 L/min |
|
Operating pressure |
32 Mpa |
|
Recommended oil tank capacity |
300 L |
|
Crane moment (dynamic) |
913.8 kNm 93.1 mt |
|
Torsional moment (dynamic) |
52.5 kNm 5.4 mt |
|
Crane Weight |
6000 kg (Floor Control) 6000 kg (High Seat) |
Detail pictures
1,Throttle Control System
Changing the form of previous manipulation and throttle operation individually,Realization of the bilateral handle synchronous and driving throttle acceleration and deceleration automatically, due to the speed change steady,it can easily to carry out the lifting work.
2,End position automatic hook device
Maximum savings in preparation time before and after operation, to ensure that customer's vehicle could be in a driving state in the shortest time, and prevent crane damage accident caused by hoist swing to enhance the safety of driving.
3,Hoisting overwinder device
If a user is negligent or unfamiliar with the operation of lifting hooks,the hoisting overwinder device will stop hook raise in time, to prevent the safety of personal and property caused by fracture of wire rope.
4,Slewing locking device
Slewing locking device can ensure that the lifting arm does not sway because of the centrifugal force during the driving and steering process of the vehicle,to avoid all kinds of accidents caused by swaying.
5,Dual pump converging
The hydraulic system adopts dual high pressure gear pump, multi-way valve hoisting joint to realize the converging, to improve the speed of winch, at the same time, it can realize the compound action of crane.
6,Torque limiter
It can select torque limit overload protection device to prevent users because of negligence or unfamiliar with the lifting operation principle of overload operation, thereby causing the vehicle rollover and crane damage accidents.
CS TRUCKS Isuzu giga boom crane truck advantages:
1). Use HG70 international standard high-strength steel to reduce the weight of crane.
2).The boom of the stiff boom crane is used hexagonal structure,reducing the lateral.
3).Italian brand of balance valve,hydraulic lock,operated valve,hydraulic pump and other core parts to ensure the micro-mobility,security and stability.
4).Parker brand oil seal and gasket for hydraulic pump.
5).Brand scanreco remote control operate from Sweden.
Hot Tags: isuzu giga boom crane truck, China isuzu giga boom crane truck manufacturers, suppliers, factory, Isuzu GIGA Boom Crane Truck, Utility Truck, 14 ton crane on HOWO cargo truck body, Isuzu GIGA VC61 VC66 heavy duty 16ons Palfinger crane truck, Isuzu GIGA truck mounted Palfinger 10tons straight boom crane, Howo Truck Mounted Boom Crane
