Products Description
Potable water tanker is a vehicle designed to transport and distribute potable (drinkable) water to areas in need. It is an essential asset in regions where access to clean water is limited or during emergencies when regular water supply systems are compromised.
The main purpose of a potable water tanker is to ensure that people have access to safe drinking water. This is especially crucial in areas where the local water supply may be contaminated, unreliable, or unavailable. Potable water tankers can bring water to remote communities, temporary settlements, disaster-affected areas, or events where a large number of people need access to clean drinking water.
The ISUZU FVZ potable water truck is custom-made for drinking water transportation. The water tank is made with high quality stainless steel 304-2B, which is suitable for delivery of driking water or edible oil. Tank capacity is up to 20000 liters.
Key Features
----► Tank body are customized to meet specific needs of customer
----► Tank made of food grade stainless steel
----► Equipped with self-sucking water pump
----► Equipped with front, side and rear spray nozzles
----► Stainless steel pipeline system
Technical Specification
Potable water tankers can vary in size, with capacities ranging from a few hundred gallons to several thousand gallons. The size of the tanker depends on factors such as the amount of water needed, the distance to the water source, and the duration of the water supply required. Some tankers are equipped with pumps and hoses to facilitate the distribution of water to various points of consumption.
| Description | ISUZU FVZ Water tank truck/Water Delivery Truck/Drinking Water Transport Truck | |
| Drive Model | 6X4 | |
| Number of axles | 3 | |
| Vehicle Main Dimensions | Dimensions(L x W x H)(mm) | 8900*2500*3200 mm |
| Wheel base (mm) | 4650+1300 mm | |
| Overhang (front/rear) (mm) | 1250/2050 | |
| Wheel track (front/rear) (mm) | 1900/1800 | |
| Approach/Departure angle(°) | 20/15 | |
| Weight in KGS | GVW. | 25000 |
| Max. driving speed(km/h) | 90 | |
| Engine | Model | Japan brand |
| Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | |
| Horse Power(HP) | 300HP | |
| engine capacity(ml) | 9726 | |
| Emission standard | Euro Vi | |
| Gearbox | 9 forwards & 1 reverse | |
| Clutch | Reinforced diaphragm clutch | |
| Steering Gear | Power steering, hydraulic steering with power assistance | |
| Fuel tank (L) | 400 | |
| Tire | 11.00-20tire , 6 + 1(spare) | |
| Brakes | dual circuit compressed air brake | |
| Tank Body | ||
| Material | Q235A Carbon steel / Stainless Steel 304 or 316 | |
| Medium | Water | |
| Loading Capacity (m³) | 15-20 m3 | |
| Overall dimensions(mm) | 6600×1800×1200 | |
| Thickness(mm) | 5 | |
| Standard Equipment | 1.Equipped with front,rear,side sprinkler (sprinkling width>14m ) 2.Equipped with rear working platform with water cannon which can be turned all-round (range>28m),can be adjusted into flinging, heavy rain,light rain, drizzle model, with security barrier. 3.Equipped with CLW pump(suction lift>6m) 4.Equipped with fire valve, water valve, and filter gauze |
|
| Optional Equipment | 5.Firefighting pipe 6.Firefighting Pump 7.The painting |
|
Truck detail
Food garde stainless steel tank
5 compartments
Rear ladder
Hose carrier
Stainless steel pipeline
ISUZU cabin with sleeper
Water Tanker Pipeline system
Most water tankers contain an inlet, outlet, and overflow pipe made of steel. If the tank is used for potable water, the inlet and outlet pipes should be two separate pipes, as a silt stopper is required at the end of the outlet pipe to keep out sediment and contaminants.
what we do to ensure good quality drinking water truck
The requirements for welding of drinking water transport truck tanks are very strict. Drinking water is a necessity for human life, and safety and hygiene are the primary considerations. Therefore, the welding quality and technical requirements for the tank are very high.
1, welding materials must comply with relevant standards. The welding materials used must be of reliable quality and certified products. Although welding is the most common joining method for stainless steel tanks, welded joints are susceptible to rust and cracks, so choosing the right materials and alloys can avoid these problems.
2, the technical requirements for welding are very high. Welding operators must undergo professional training and have extensive welding experience. During the welding process, attention should be paid to controlling the welding parameters, such as welding current, voltage, welding speed, etc., to ensure stable and uniform weld quality. In addition, certain protective measures need to be taken during the welding process to avoid thermal deformation caused by welding.
For larger tanks, segmented welding can be used to reduce the impact of thermal deformation on the entire tank structure, and the overall assembly can be carried out after the welding is completed. In addition, the welded tanks also need to undergo strict quality inspection. Inspection methods can include X-ray or ultrasonic inspection to ensure that the weld is free of any defects. At the same time, a hydrostatic test is also required to ensure the pressure resistance of the tank.
Hot Tags: potable water tanker isuzu, China potable water tanker isuzu manufacturers, suppliers, factory, Water Carrier Truck ISUZU, 6 000L ISUZU water tanker truck, Potable Water Tanker ISUZU, 5 000L water hauler ISUZU, Truck Mounted Water Tank, 6 000L water bowser ISUZU
