Mini Isuzu Lega Fire Engine Truck

Mini Isuzu lega fire engine truck, also called as Isuzu lega fire tender, Isuzu pumper fire truck, is composed of two types of Isuzu lega fire truck chassis, water tank, pump, pipeline, instrument circuit system and other components, the car assembly after aluminum alloy ladder (removable), pump room in the tail of the vehicle, tank body welded steel plate, liquid load 5 square, water tank material for high-quality carbon steel plate, water tank internal anti-corrosion treatment. The vehicle is equipped with CB10/30 fire pump,PS30 fire cannon.

 

New 4x2 ISUZU Fire Truck 2,800L Specification

 

Name Water Tank Fire Truck Model PT200PM Painting Fire red (RAL 3000) (Customer LOGO welcome)     Chassis Brand ISUZU Chassis Model ISUZU MINI ELF Engine power 72KW (98HP) 4X2 Drive, Double Cabin Outline dimension 5960×2300×2680 mm Total weight 7300 kg Number of Seats 1+1+3 (inc. driver)   Fire-extinguishing Agents Water (L) 2000L Foam (L) without Chemical (L) Without   Fire pump Model XIONGZHEN CB10/30 Pressure (Mpa) 1.0 Rate (L/s) 30   Fire Monitor Model PL24~48 Rate (L/s) 48 Throw Range(m) Water ≥ 55, Foam≥ 45 Fire Equipment Factory standard Special equipment for optional

 

01, Truck chassis:

Model	Parameters	others
Chassis	ISUZU mini ELF	Fire application
GVW	7300kg
Engine Model	4JBCN	ISUZU
Engine Power	98 HP
Wheelbase	3360 mm
Driving Type	4x2/ 6 wheels	Left hand
Transmission	MSB 5-shift	Manual
Emission Standard	2771 ml	Euro 4
Passenger No	2+3
Cabin	4 doors, double row of seats	A/C

 

02, Water Tank:
Capacity	2.000L
Material	Carbon steel, Thickness min=4mm
Design	Tank is designed that the center of gravity as low as possible.
Structure	All metal welding structure, the overall corrosion resistance, have Shock absorption measures
Equipped	1 suction hole at the rear of pump room
	1 overflow valve device
	1 drain outlet with ball valve
	2 DN65 inlets at both sides, structure: ball valve with inside bend upturning pipeline

 

03, Foam Tank:
Capacity	NIL
Material	Stainless steel SS304, Thickness min=4mm
Design	Tank is designed that the center of gravity as low as possible.
Structure	All metal welding structure, the overall corrosion resistance, have Shock absorption measures
Foam mixing system	Model: PH64
	Mixing ration: 3%~6%
	Mixer type: Manual

 

04, Fire pump:
Model	CB10/30
Type	Centrifugal pump
Rated flow	30L/S @1.0Mpa
Outlet pressure	≧1.3 Mpa
Max pumping height	7 m
Max vacuum	≧85 kpa
Priming device	Vacuum pump
Priming time	≧ 45s
Operation	pump PTO on / off from inside the drivers' cabin, all other operation will be done from the rear of the pump, from rear side of the vehicle;

 

 

 

05, Fire monitor:
Model	PL24
Type	Manual
Rated flow	24L/S
Angle	≧90
Range	≧ 55m
Rotation angle	≧360

 

 

06, Bodywork & Pipeline

 

The overall layout	Body is made of approved steel tube construction, Flooring made of chequered aluminium; LED lighting in equipment compartment; Each compartment closed by light aluminum roller shutter. According to human body engineering principle design all kinds of equipment frames
	The aluminum alloy shutters are installed at both sides of the body and theback of the pump compartment, the ladders are installed on the back of the body at the right side.
Technical requirement	All welding panels and skeleton steels are through strict process of anti-rust, anti-corrosion and phosphating pickling. After completing welding of the tank, the tank will be clear up and removed possible defects such as empty solder. And then it will be through 24-hour hydrostatic test to assure no leakage.
Suction piping	1 DN125 suction hole at the rear of the pump room with filter screen and pneumatic Butterfly valve switch
Injection pipeline	2 DN65 injection holes on both sides,1 DN80 injection hole inside pump room.
Fire control system	Marks on all operation buttons, with pipeline layout and operation/maintenance illustration. Dashboard lays upper left in the pump room with RPM/Vacuum/water/Pressure/liquid level indicator and lighting/valves control switches
Electrical system	Pump room LED lighting, Side flashing light, long red warning light on the cabin, Rear rotation fire lighting.

 

4. Superstructure Parameters

4.1 Cabin

4.1.1 Structure: Double-row seat integrated welding structure with special hydraulic turning mechanism.

4.1.2 Seats: 1+1 in the front row, 4 people in the back row.

4.1.3 Safety: Three-point pre-tightened seat belts are installed.

4.1.4 SCBA Setting: SCBA brackets are installed at the rear seats, and 6.8L-9L air cylinders can be placed.

4.1.5 Interior: PTO switch and alarm lights switches installed in the cab etc.

4.1.6 Lighting: Original lighting of chassis.

4.1.7 Step ladder: High-strength integrated non-slip step ladder.

4.1.8 Storage space: Storage box is arranged under the rear seats.

4.1.9 Air conditioning: fluorine-free environmental protection air conditioning system.

4.1.10 Handrail: Non-slip safety handrail.

4.2. Subframe

4.2.1 Material: High-strength special steel.

4.2.2 Performance: The liquid tank and the sub-frame are connected by elastic connecting seats with torque reduction performance, which not only increases the flexibility of the connection between the frame and the tank, prevents deformation and breakage of the upper body, but also increases the strength of the upper body.

4.3. Compartment

4.3.1 Material: All made of high-strength aluminum alloy profiles.

4.3.2 Structure: The frame of the carriage is all-aluminum alloy frame welded structure, and the outer skin is made of bonded aluminum alloy plates.

4.3.3 Roof guard: Made of aluminum alloy as a whole, with strobe warning lights and exterior lights installed outside, and LED roof lights inside.

4.3.4 Ladder frame: A set of multifunctional ladder frame is set on the top.

4.3.5 Rear ladder: An aluminum alloy safety ladder leading to the roof is set on the right side of the rear.

4.4. Roller Shutter

4.4.1 Material: Lightweight high-quality aluminum alloy.

4.4.2 Structure: A diversion groove on the top and a sealing strip around it, which has good rainproof and dustproof sealing performance.

4.4.3 Layout: The sides of the equipment box and the rear pump room.

 

4.5. Foot Pedal

4.5.1 Material: High-quality aluminum alloy profile.

4.5.2 Structure: Overall drawing structure of aluminum alloy profile, with a width of 50cm and a load-bearing capacity of more than 300kg.

4.5.3 Layout: Under the equipment box and pump room.

4.6. Electrical System

4.6.1 Warning light warning: Long row warning light are set on the top; The control devices are installed in the cab.

4.6.2 Equipment box lights: There are LED white lighting strips on both sides of the equipment box. The light switch and the rolling door are linked.

4.6.3 Strobe lights: Strobe lights for warning are arranged on the upper part.

4.6.4 Exterior lighting: LED lights for lighting are provided on the upper part of the compartment.

4.6.5 Roof lighting: LED lights are provided inside the top of the carriage.

4.6.6 Side Indicater Light: Built-in yellow indicater lights are installed on pedals.

 

Hot Tags: mini isuzu lega fire engine truck, China mini isuzu lega fire engine truck manufacturers, suppliers, factory, Fire Truck Water Tank Isuzu, 3 000L isuzu NPR fire truck chassis fire engine, Isuzu Fire Truck, 5 000L isuzu FVR CAFS truck chassis fire fighting truck, CAFS Fire Truck Isuzu, 14 000L fire fighting engine mounted ISUZU GIGA truck