Products Description
With the improvement of our living standards, domestic garbage is increasing day by day, accounting for a large proportion of all garbage. Moreover, domestic garbage is relatively fluffy and takes up a large area, which greatly increases the number of garbage truck transportations. Our ISUZU rear end loader can effectively and quickly solve these problems. By compressing and squeezing garbage, the number of garbage truck transportations is reduced, manpower and material resources are greatly saved, and work efficiency is improved. It easily solves the mess, mess and mess caused by untimely garbage cleaning, and also avoids secondary pollution caused by fluffy garbage flying everywhere.
The compactor body of our waste compactor truck is a solid frame structure welded by reinforced beams and steel plates. The bottom surface is a concave plane, and the side and top are arc surfaces. It has a beautiful appearance, light weight, good stress resistance, and no deformation. The push shovel is made of a steel pipe frame and a folded panel structure, which is not only light in structure, but also can distribute the garbage evenly and discharge the material cleanly and thoroughly. The tailgate is mainly composed of the shell, slide plate, scraper and other components, and each component adopts a beam plate with good stress, solid construction and light weight.
Products Specifications
|
SPECIFICATIONS |
|
|
VEHICLE SPECIFICATION |
DESCRIPTION |
|
Vehicle Model |
CSC5070ZYS |
|
Vehicle Type |
Waste compactor truck |
|
Truck Brand |
CS TRUCKS |
|
Driving Model |
Left hand Driving |
|
The Gross Vehicle Mass |
7,300kg |
|
Curb Weight |
5,400kg |
|
Max speed(km/h)(km/h) |
90 |
|
Color |
White |
|
Manufacture |
CS TRUCKS |
|
Chassis Information |
|
|
Frame Details |
Parallel ladder with U-profiles and riveted cross members |
|
Dimension(Lx W xH)(unloaded)(mm) |
6500x2200x2650 |
|
Approaching angle/Departure angle(°) |
24/16 |
|
Overhang(front/rear) (mm) |
1504/1425 |
|
Wheel base (mm) |
3360 |
|
Engine |
|
|
Model |
4KH1CN5HS |
|
Brand |
ISUZU |
|
Power |
130HP |
|
Emission |
EURO 5 |
|
Displacement(L) |
3.0 |
|
Type |
water-cooled，four strokes，4 cylinders in line，turbocharged, directly injection |
|
Kind of Fuel |
Diesel |
|
Clutch & Gear Box System |
|
|
Clutch |
Dry single plate with cushioning spring |
|
Gear Box |
MSB, 5-speed, manual |
|
Brand |
ISUZU |
|
Axles |
|
|
Front Axle Model |
2500kg |
|
Rear Axle |
4800kg |
|
Electrical System |
|
|
Battery |
2X12V/60Ah |
|
Alternator |
12V |
|
Starter |
24V |
|
Brake System |
|
|
Service brake |
Front disc, Rear drum, Vacuum Servo Hydraulic front / rear split system |
|
Parking brake |
Mechanical parking brake on propeller shaft |
|
Auxiliary brake |
Engine exhaust brake |
|
Steering system |
|
|
Type |
With power assist |
|
Brand |
ISUZU |
|
Wheels & Tyres |
|
|
Type |
7.00R16 |
|
Material |
Radial |
|
Quantity |
6+1 spare |
|
Cabin |
|
|
Type |
ISUZU 600P standard cabin |
|
Single cab, two seats, with air-condition, all-steel forward control,55ºhydraulically tiltable to the front, 2- arm windscreen wiper |
|
|
Compactor Body |
|
|
Volume of body(m3) |
6 |
|
Volume of filler(m3) |
1 |
|
Time of one filling cycle(s) |
<25 |
|
Time of discharge(s) |
<45 |
|
Pressure of fluid system (Mpa) |
18 |
|
Hydraulic system control |
Manual |
|
Compaction ratio |
3:1 |
|
Lifting time of filler(s) |
8-10 |
|
The hydraulic oil tank volume |
150L |
|
Oil cylinder type |
Double acting piston |
|
Operating voltage |
24V |
|
Control valve |
Multiple directional control valve |
Products Features
1. Intelligent control system
It adopts imported CAN bus design and has three control modes: manual, automatic and semi-automatic. Optional remote control is available to meet different working environments, making it convenient and efficient
2. Balance valve
Ensure that the cylinders work synchronously and effectively protect the cylinders.
3. Hydraulic oil tank
The oil tank volume is enlarged to effectively improve cooling efficiency and stabilize oil temperature and pressure. It is equipped with an oil return filter device to effectively filter impurities carried by the hydraulic oil and extend the service life of the oil.
4. Multi-way directional valve
It adopts the China top brand manual pneumatic valve, which is professionally customized and accurately matched with the gear pump used in the vehicle. It has high precision and stable performance.
5. Rear sewage tank
A sewage collection device is installed at rear to effectively prevent leakage and avoid secondary pollution.
Tips for using waste compactor trucks
1. Regular maintenance
Like other vehicles, waste compactor trucks also require regular maintenance. It is recommended that users inspect and maintain the vehicle's air conditioning, electrical appliances, oil circuits, brakes, transmission and other components after using it for a certain period of time, and deal with problems in a timely manner if they arise.
2. Cleaning and disinfection
Due to frequent contact with garbage and sewage, various germs are easy to breed. Therefore, compressed garbage trucks should be cleaned and disinfected in time after transportation. When cleaning, you should use a high-pressure water gun to thoroughly rinse away the remaining garbage and stains inside the carriage. For disinfection, you can choose to use some disinfectants to achieve better disinfection effects.
3. Refuse to overload
The design load capacity of refuse compactor trucks is stipulated in accordance with relevant laws, regulations and technical standards. Overloading is strictly prohibited and will not only damage the vehicle itself, but also pose a threat to road traffic safety and may also lead to fines and liability consequences. Users should abide by relevant regulations and strictly control the load capacity of vehicles.
4. Correct usage
When using rear loader trucks, users should abide by the principle of step-by-step and use the correct compression method according to different types of garbage. Do not over-compress or ignore compression, causing unnecessary waste or failure to completely remove the garbage. .
5. Professional maintenance
As a type of commercial vehicle, compressed rubbish trucks must undergo regular professional maintenance. It is recommended that users pay attention to maintenance details during use, control the maintenance cycle, purchase spare parts uniformly, and have regular inspection and maintenance performed by repairers authorized by the manufacturer.
Hot Tags: isuzu rear end loader, China isuzu rear end loader manufacturers, suppliers, factory, ISUZU Garbage Compactor Vehicle, 4CBM ISUZU mini ELF 4x2 refuse compactor truck, Trash Compactor Truck Isuzu, Waste Management Rear Loader Truck ISUZU, Truck Mounted Garbage Compactor ISUZU, 4x4 Waste Truck Compactor ISUZU
