Products Description
Japanese ISUZU 8-10 tons tank truck, Japan ISUZU 6 to 8 tons of isuzu motor company QL1180EQFRY share water fire truck as suits the four standard second class chassis, light fuel efficiency, low noise, strong power, solid and durable, strong maneuverability, spraying range far and other advantages and characteristics, from the natural water and fire hydrant water directly, and with the water storage tank and class B bubble, equipped with fire pump, bubble gun, cannon, etc. ISUZU FVR Water Fire Truck is a powerful, efficient and reliable firefighting vehicle with a large-capacity water tank system, a high-pressure pump system and a multi-functional water spray device. Its excellent performance and advanced technology make it an important equipment for the fire department in fire extinguishing and emergency rescue, and can effectively protect people's lives and property safety.
The fire truck is refitted based on the ISUZU 4x2 LHD chassis. The refit part includes tanker system, actuator device, operation system and firefighting equipment.
- Tanker: water tanker, standard steel pipelines for firefighting process.
- Actuator device: includes sandwich power take off, drive line, etc., which can pass the power from the chassis to the fire pump.
- Operation system: the Electric control system located at rear of pump house, which can view pump vacuum rate, water tanker and foam tanker level, light system, etc. this helps come to all special functions' convert.
- Firefighting equipment: whole standard firefighting equipment.
Technical Parameters
Having wide distribution channel across globe, we are able to offer a supreme quality Isuzu Water Fire Tender. Consisting all the fire equipments and aprons like insulated gloves and mask, the offered tender is demanded at fire place to prevent from damages. Manufactured under the guidance of experienced professionals, this tender is further tested prior to dispatch for ensuring quality standard. The provided Isuzu Water Fire Tender is available from us at cost effective prices within promised time frame.
Why choose CS TRUCKS Fire Engine
CS TRUCKS provide full solution to ISUZU Fire Water Trucks all over the world
Round tanker for water, capacity 10000liters, with full sets fire fighting equipment accessories
TOP 1 Chinese brand fire pump with CB10/40 model with 40L/s on pressure 1.0Mpa
PS30 fire monitor equipped on the top of the fire water truck, with water range over 55m
|
ISUZU FIRE TRUCKS Upper-Body specification |
||
|
Water tank |
Volume |
10000L |
|
Material |
high quality carbon steel plate, round tanker, anti-rust treatment inside. |
|
|
Fire fighting pump |
Model |
Shanghai Rongshen CB10/40 |
|
Max working pressure |
1.251Mpa |
|
|
Max allowable entrance pressure |
0.4Mpa |
|
|
Flux: |
Water 40L/S |
|
|
Suction depth |
≥ 7m |
|
|
Suction time |
≤35s |
|
|
Fire knozzle |
Model: |
WEST PS30 |
|
Range: |
≥ 55m |
|
|
working pressure |
≤1.0(Mpa) |
|
|
Horizontal rotation angle |
360 º |
|
|
color |
The whole vehicle is red for fire fighting, there are white in the middle of truck in accordance with the whole truck |
|
What is ISUZU FVR 240HP Water fire apparatus
ISUZU FVR Water Fire Truck is a water tank firefighting vehicle produced by CS TRUCKS. It is a powerful tool professionally designed for fire extinguishing and emergency rescue, and is widely used in fire departments and emergency rescue agencies. ISUZU FVR Water Fire Truck combines the excellent quality of Isuzu Motors and the expertise in the field of fire protection to provide reliable and efficient solutions for fire extinguishing and rescue operations.
The equipment is mainly for three purposes: extinguishing fire, saving life and eliminating danger. For detailed items, please refer to equipment list.
- Suction hose: for connecting the pump inlet with the water source, equipped on the top of the truck; the number is 4, each length is 2 meters.
- Water filter: for preventing the pipe system from being blocked by the odds. When the fire pump stops running, the water in suction pipe will not spill out for the check valve or say one-way valve in the filter, so water will get in quickly while restarting the pump.
- Manifold for separating: connecting equipment for dividing the main hose into three smaller caliber hoses. Each outlet has been controlled by the ball valve, so they could work at the same time, or separately.
- Manifold for converging: while connecting the external water source by water hose, the manifold for converging could be fitted in the inlet of fire pump, with another two 65mm connector to connect with the water hose, and the other end to the water source.It is always used to supply & get water between several fire truck, or connect the fire hydrant(100mm).
- Reducing caliber connector: for connecting the outlet valve and the water hose with caliber between 80mm and 65mm.
- Hose coating: for wrapping the leaking place of the water hose tightly while there is leaking in firefighting, preventing the leaking place expanding and reducing the water loss.
- Hose link: for hanging the water hose on climbing ladder, helping the fire fighter control the hose.
What should do for maintenance of ISUZU FVR Fire Water Truck
1. Cabin
Check periodically whether the alarm lamp, electrical equipment, switches and fuse are in good state or not.
If necessary, please make the maintenance and replacement in time.
2. Tank
While the tank being full of extinguisher permanently, the extinguisher is corrosive for the tank. The tank should be checked periodically. Once it has been rusty, it is necessary to take some effective measures, preventing the rusty expanding. The common method is to clean the rusty point, after drying completely, brush it with epoxy resin paint. Also check the valves and pipeline periodically.
3. Hose box
Check periodically whether there is sleeper in the hose box, whether the roller door is flexible or damage, whether the oil of the chute of the door is lacking, whether the equipment are clean, dry and in good condition, whether the rubber rings of all joints are normal, whether the equipment are fixed firmly.
4. Pump room
Check periodically whether the equipment in pump room is in good condition. If there are standing water and oil stain, it must be cleaned. Check whether the standing water and oil stain are results from system leakage, if it is, make the maintenance in time.
5. PTO, Transmission shaft
Check the oil level and quality, change or add if necessary. Check the sound running state of PTO to find out whether it is blocked or spontaneous out-of-gear, if it is, check and repair in time. Check the sound of pump drive shaft. Check if all fasteners are tight or not.
6. Fire pump
a．While working, add lubricant to each running part every 3-6 hours.
b．Add lubricant to the screw thread of inlet and outlet, cover the cap.
7. Monitor and its pipeline
Check all fasteners, joints, turning parts after using. Add lubricant to turning part periodically
8. Middle pressure reels and gun
Check whether the reel pipe, joints, valves and reel roller are in good condition, check air tightness of all joints.
Add lubricant to turning part periodically
9. Additional electrical system, instrument
Check periodically whether the alarm lamp, siren system, hose box light, pump room light , solenoid valve , fluid level gauge and other instruments, check the fuse.
Hot Tags: isuzu fire water truck, China isuzu fire water truck manufacturers, suppliers, factory, 15000L Isuzu FVZ water fire truck for sale, Rescue Truck, Sinotruk HOWO mobile generator 30kw power truck, ISUZU FVZ Fire Truck For Mining, HOWO Mobile Rescue Laundry Truck
