This ISUZU 4×2 drive vacuum jetting truck is a medium sized, high efficiency sanitation vehicle, its 12000 liters large capacity tank, combined with 4×2 drive and a 240 horsepower 6HK1-TCL engine, balances urban street mobility with single operation range. Suitable for routine maintenance of municipal pipe networks, emergency dredging, and community septic tank cleaning, it achieves a balance between economy and operational efficiency through reliable power and moderate tonnage.
Model: CSC5180GXW
Capacity: 12000 Liters
Drive: 4×2
Engine Power: 240 HP
Engine Type: 6HK1-TCL
Send Inquiry
Description
This ISUZU 4×2 drive high pressure jetting truck, also known as a combined dredging truck or sewer cleaning and dredging truck, uses a Qingling 4×2 chassis and is equipped with a 6HK1-TCL diesel engine with a power of 240 horsepower, meeting the Euro V emission standards. The total volume is 12000L, divided into an 8000L sewage tank and a 4000L clean water tank. Its compact size and good maneuverability make it suitable for municipal pipeline maintenance operations in the Philippines.
★Philippines Combination Sewer Cleaner Unit★
The vehicle is equipped with a PVT200 vacuum pump and a PF36 high pressure plunger pump, integrating sewage suction and high pressure dredging functions. The tank is a horizontal carbon steel structure with anticorrosion treatment and is equipped with a hydraulic rear cover. It comes with hoses and quick connect fittings for rapid on site operation, enabling stable and efficient completion of pipeline dredging and sludge suction.
🔶Chassis and Powertrain: Based on the Qingling Isuzu FVR 4×2 chassis, equipped with a 6HK1-TCL diesel engine, 240HP, Euro V emission standard, high torque output, suitable for overseas operating conditions such as the Philippines.
🔶Tank Configuration: Total volume 12000L (8000L sewage tank + 4000L clean water tank), horizontal carbon steel tank body, corrosion-resistant inner wall, hydraulic rear cover opening.
🔶Suction System: Equipped with a PVT200 Roots vacuum pump, pumping speed 1280m³/h, ultimate vacuum 93%, highly efficient for pumping sludge and sewage.
🔶High Pressure Cleaning System: PF36 three cylinder plunger pump, pressure 16MPa, flow rate 122L/min, paired with a rear-mounted high-pressure reel, powerfully unclogging pipes.
🔶Operating Equipment: Standard configuration includes DN100 suction hose and high pressure water gun; the vehicle has a compact size and a maximum speed of 105km/h, balancing operational capabilities with road accessibility.
✴️Independent Dual Tank Design: 8000L wastewater tank + 4000L clean water tank, allowing for independent storage and a larger single operation capacity.
✴️Corrosion Resistant Structure: Horizontal Q235B carbon steel tank body with an anti corrosion coating, resistant to wastewater and sludge corrosion, resulting in a longer service life.
✴️Hydraulic Rear Cover: Easy to open, facilitating sludge unloading and simplifying tank maintenance.
03
Comprehensive Advantages
✴️Multifunctional: Simultaneously functions as a vacuum cleaner and high pressure cleaner, replacing separate vacuum trucks and high pressure cleaning trucks, reducing procurement costs.
✴️Suitable For Municipal Scenarios: Specifically designed for maintenance of municipal pipe networks, sewers, and septic tanks in the Philippines.
✴️Complete Accessories: Comes with a hydraulic reel, quick connect couplings, and vacuum hose for rapid on site deployment.
High Pressure Cleaning System
Vacuum Pump
✅PVT200 Vacuum Pump: Pumping capacity up to 1280m³/h, ultimate vacuum up to 93%.
✅Powerful Suction: Efficiently extracts sludge, sewage, and septic tank waste; DN100 suction hose meets actual operating distance requirements.
✅Stable Operation: Rated power 35 kW, maximum speed 1500 rpm, maximum vacuum pressure 1.5 bar, low failure rate.
High Pressure Pump
High Pressure Plunger Pump: PF36 high pressure plunger pump, working pressure 16MPa, flow rate 122L/min, powerfully breaks up pipe silt and scale.
High Pressure Hose Reel: Rear mounted manual reel, hose length 60–80m, wide operating range, suitable for long distance sewer unclogging.
Quick Connect High Pressure Water Gun: With quick connector, easy to assemble and disassemble, suitable for various working conditions such as pipe cleaning and wall washing.
Working Principle
The cleaning and vacuuming truck uses a power take off to drive a high pressure pump and a vacuum pump respectively. It uses high pressure water flow to break up pipe blockages and negative pressure to suck up mud and water. The dual compartment tank can store clean water and collect sewage, and can complete the pipe network dredging operation by flushing and suction at the same time.
Product Details
Multi-way Valve
Control Panel
Driver's Cab
Sight Level Gauge
Hydraulic Reel
Suction Port
Water Gas Separator
Fuel Tank
Application Scenarios
ISUZU 12000L Combination Sewer Cleaning Truck for Factory
ISUZU 240HP Sewer Flushing and Cleaning Truck for River Silt Removal
ISUZU 4×2 Vacuum Jetting Truck for Septic Tank Cleaning
ISUZU 4×2 High Pressure Jetting Truck for Sewer Flushing
Exterior Views
Front Right View of ISUZU 12000L Vacuum truck Combined Jetting
Front Left View of ISUZU 4×2 Heavy Duty Vacuum Jetting Truck
Rear Right View of ISUZU 240HP Vacuum Jetting Truck Price Philippines
Rear Left View of ISUZU 4×2 Vacuum Jetting Truck for Sale
Right View of ISUZU Water Jetting and Sewage Suction Truck
Front View of ISUZU 240HP High Pressure Sewer Jetting Truck
Rear View of ISUZU 12000L Sewer Vacuum Truck Rental
Operation And Maintenance
1) Preoperation Checks: Before operation, check key components such as the power take off, vacuum pump, and high pressure water pump to ensure secure connections and normal operation.
2) Pipeline Checks: Check the high pressure water hose and suction hose to ensure there is no damage or leakage, and that all joints are tight.
3) Tank Maintenance: Regularly check the tank welds and seals to prevent leaks; the tank lifting mechanism should be lubricated regularly, and the hydraulic oil level should be checked.
4) Safety Devices: Check the rear underrun protection devices to ensure they are intact and that the ground clearance meets requirements.
5) Tire Checks: Regularly check tire pressure and wear to ensure driving safety.
1.we can do the designs accordingto the your requirement .
2.we can offer you the high quality & reasionalble price.
3.we can offer your a reliable after sale service.
4.we have skilled professinal design team.
5.promptly delivery. any order is welcome.
We CS also supply spare parts (original, OEM, and replacement) for all types of trucks and trailers with discount and nice quality to ensure our customers's trucks and trailers being in good working conditions.
Hot Tags: philippines combination sewer cleaner unit, China philippines combination sewer cleaner unit manufacturers, suppliers, factory
